Labotect C-Top Incubator – IVFSynergy

Labotect C-Top Incubator

For more information or a quote on this item please email IVFSynergy

Below you will find some useful product details

REF 14876

Benchtop incubator for up to date, individual cell cultivation

Advantages of Labo C-Top:

  • Approved medical device
  • Two independent and separate incubation chambers;
    Parameters (gas flow, temperature) can be adjusted individually
  • Optimized gassing with premixed gas
  • Optimized temperature distribution by double heated chamber from top and bottom;
    Very fast heating up and recovery times
  • Reliable humidity system;
    The current value of relative humidity is displayed (% rH)
  • Convenient glass control panel
  • Space saving



Incubation chambers

In the lower part:

·         Slots provide full contact to culture dishes

·         Adaption for humidity block

·         Gas inlet

Easy cleaning
Independent, for use with (per chamber):

·         4 x IVF 4-well dishes 66x66 mm

·         4 x Petri dishes Ø 60 mm

·         10 x Petri dishes Ø 35 mm


Overall heating from top and bottom
Very homogeneous temperature distribution


Humidification by means of humidity block 
Reservoir sufficient for 4 days (when gassing with 20 ml/min)
Humidity block autoclavable
Humidity alarm is able to be disengaged

Current value of relative humidity is displayed (% rH)


Connection of premixed gas (CO2, O2 < 21 %, N2)
Separate measuring and regulation of gas flow for each chamber
Automatic gas purge when closing the chamber

Recovery times

Short recovery times for all parameters through microprocessor controlled regulation


Use of glass panel


Homogeneous glass cover
Sensoric buttons integrated into the glass
Image of placements for marking inserted dishes at the glass cover
Easy operation and menu navigation
Lit LCD at working place height

Trouble check system

Optical and acoustic alarm in case of set point deviation or defective sensor
Independent over-temperature protection
Remote alarm


PC software LaboDat+ for documentation of incubator’s parameters
Second gas inlet for use of different gas mixtures for each chamber
Lockable lids


Remote alarm (potential free)
RS485-interface for data logging with optional available PC software- LaboDat+


Technical Data:


Dimensions 403 x 225 x 155 mm (w x d x h)
Weight 8.8 kg


Two chambers with 0.5 litres each
Mixed load possible


Overall heating from the top and bottom of each chamber
Range 30 °C - 42 °C from 7 °C above 
ambient temperature
Stability / uniformity ± 0.1 °C / ± 0.3 °C


Premixed gas
Gas flow adjustable between 20 ml/min and 30 ml/min
Flow rate after opening the lid (automatic gas purge):
250 ml/min for 3 minutes

Power Supply

110 – 230 V AC, 50/60 Hz, 100 VA 
Primary pressure for gas 0.8 bar
Ambient temperature 18 °C - 30 °C


Safety class II
Class IIa for every usage according to EC-Directive 93/42/EEC
EN 61010 conform