REF 15245
Incubator with 200 litre chamber capacity
Advantages of Labo C201:
- 7“ colour touch screen
- UV decontamination (option)
- Particle filter (P3) within the airflow
- Graphical display of recorded parameters of the past 2 h or 24 h (T, CO2, rH, O2)
- Cable bushing (Access port)
- Access control via numerical code (option)
- RS485 or ethernet interface
- Active sterile humidity:
External water reservoir
Distilled water is vaporized at 120 °C
Minimized risk of contamination
Humidity sensor (rH)
Very fast recovery
Dual-beam infrared sensor
Very precise measurement
Very fast recovery
Long-term stable
Independent six-sided direct heating
Homogeneous temperature distribution in the incubation chamber
Very fast recovery
UV decontamination
O2 control
Subdivided inner glass door with 6 small doors
Access control via numerical code
PC software LaboDat+
Features:
|
Interior
|
Electro-polished stainless steel with coved corners
Shelves and ductwork easily removable for cleaning purpose
Access port Ø 30 mm
|
|
Temperature
|
Intelligent temperature control system
avoids condensation in the inner chamber
|
|
Humidity supply
|
Active sterile humidity via an external water supply container
|
|
CO2 control
|
Dual-beam infrared sensor
Measurement independent from temperature and humidity
|
|
Fast recovery
|
For all adjustable parameters through optimized microprocessor control
|
|
Easy handling
|
Menu guided 7“ colour touch display
Graphical display of recorded
parameters of the past 2 h or 24 h
|
|
Diagnostic system
|
Visual and acoustic alarm if the setpoint deviation or sensor defect occurs
Door monitoring
Remote alarm
|
|
Options
|
Subdivided inner glass door with 6 small doors
Access control via numerical code
UV decontamination routine
PC software LaboDat+
O2 control: connection for N2
|
|
Interfaces
|
Alarm contact (potential free)
RS485 or Ethernet interface
|
Technical Data:
|
Exterior
|
Dimensions 720 x 700 x 870 mm (w x d x h)
|
|
Interior
|
Chamber volume 200 l
Electro-polished stainless steel
Shelves height adjustable
|
|
Temperature
|
Panel heated interior chamber and door
Range 27-42 °C starting 5 °C above ambient temperature
Stability / uniformity ±0.1 °C / ±0.3 °C
Over-temperature alarm 32-47 °C
|
|
CO2 control
|
Dual-beam infrared sensor
Range 0–10 % CO2
Stability ±0.1 % CO2
|
|
O2 control < 21 % (optional)
|
Measurement with galvanic sensor
Connection of N2
Range 1-21 % O2
|
|
Humidity
|
Active sterile humidity generated by vaporization module at 120 °C
Measuring range 0–98 % rH / adjustment range 60 % – 95 % rH
|
|
Access port
|
Ø 30 mm
|
|
Supply
|
230 V AC, 50/60 Hz or 115 V AC, 50/60 Hz, 250 VA
Inlet pressure for gas 0.8 bar
Ambient temperature 18-30 °C
|
|
Classification
|
Safety class I
Conform to EN 61010
|
Options:
- Subdivided inner glass door - for even faster recovery
6 small inner doors
Even faster recovery of all parameters
Even lower gas consumption
Easy cleaning of inner doors
Scope of supply:
-6 split shelves 474 x 222 mm (d x w) each
-3 shelves 485 x 454 mm (d x w) each
Individual start by user
Duration: 180 minutes
Short-wave UV radiation (UV-C radiation, <280 nm)
UV mode is terminated immediately when the door is opened
- Access control - higher security for your cultures
Access control via touch screen
Mechanical unlocking in case of power failure (emergency release)
- Stacking kit - for safe positioning
Safe, easy and space-saving positioning of the devices in the laboratory
-REF 10649 Underframe, 15 cm height, white coated steel
-REF 10681 High frame stand, 115 cm height, white coated steel
For mobile positioning of the devices in the laboratory, on lockable wheels, preventing roller base movement
-REF 14411 Roller base, 15 cm height, on lockable wheels
|
Our Labo C201 incubators are available with O2-control (O2 < 21 %)
|
|
Each Labotect CO2 incubator passes an individual cell-growth test prior to delivery!
|